Little to no play on the triggers.
Last time I had the gun apart the locks were clean and I have not shot the gun enough for any appreciable amount of fouling to build up
There no visible cracks on the stock
"Cocking rods/arms could be worn" could be the problem, possibly aggravated by my tendency to baby the gun. I have not seen any drag marks on the primer, but I haven't really been looking too closely at the fired hulls.
Thanks everyone
Are you aware that they must be "play in the triggers" which means that there is a few thousands of an inch gap between the triggers where they contact the sears with the safety disengaged ? With the safety engaged there should be no play. If you are saying that this clearance does not exist with safety disengaged, then you need to determine why this is the case and correct it.
