Are ejector pins soldered or pressed into the ejectors?
Have one protruding slightly which gives me pause.
Please can you be more specific . Are you meaning extractor guide pegs , the small peg at the top of the extractor ?
If you could specify the make of gun as well it will help .
Do you mean protruding through the face of the ejector blade?
Shotgun is a Turkish made SKB 200 HR. Seems to be a press fit!
Silver solder it. I have repaired ejectors with broken guide pins by replacing the entire pin and silver soldering it in place, and have never had a failure of the solder joint. I used a Brownell's product called Force 44, I believe. Been a long time and I'm not 100% certain of the exact name for it.
Thanks again for your response.