S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums10
Topics38,542
Posts546,066
Members14,420
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Feb 2002
Posts: 1,096
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,096 |
Doug, If many short chambered (Flues) frames cracked when trying to digest 2 3/4 inch paper shells, (many cracked before the advent of plastic hulls, so we know) doesn't it stand to reason that barrel bursts could occur under those same conditions? Please explain how nitro proofed barrels, by Ithaca, are more dangerous than Remington twist or damascus barrels that are also nitro proofed...not all composite barrels are nitro proofed, but I think Kurt is inferring that his barrels are marked "for smokeless powder" ... Isn't his biggests concern the 2 9/16ths short chamber? And the possibility of putting a 2 3/4 inch shell into it?
...used with light loads, careful observance to the chamber lengths, and never paper shells, make these 20ga Flues still shootable to some degree...I think this concept applies to all 20 & 16 ga Ithaca Flues models, as most if not all 20ga & 16ga were short chambered...fluid or otherwise...
I'm not saying that I'm right and you're wrong, only that this was the thinking that was conveyed to me 30 years ago when I bought my first Ithaca Flues (16ga). Has this thinking been overturned?
|
|
|
|
Joined: Feb 2002
Posts: 73
Member
|
Member
Joined: Feb 2002
Posts: 73 |
I just got back from testing a flat of Polywad Vintagers and was really impressed. I used them in an Ithaca Minier, a Flues Pigeon and 11/2 Grade damascus Flues. They really patterned well at 30-40 yards and despite the shooter managed to braek most clays. When I called to purchase the shells they were very helpful and gave me the pressures of the various shells and made suggestions for my trip to Iowa to hunt pheasants. I plan to buy another flat. I also asked about any non-toxic shells and they said they we considering making those in the future. Nice folks.
David
|
|
|
|
Joined: Aug 2007
Posts: 10,869 Likes: 201
Sidelock
|
Sidelock
Joined: Aug 2007
Posts: 10,869 Likes: 201 |
I have heard a few clay shooters say that the Polywads burn a little dirty, but that is the only negative. But all dealings I have had with them have been pleasant. I have requested #5s for pheasants but haven't gotten an answer. Once, they sent a flat of the wrong shot size & wanted to issue a UPS pickup. I told them to just send me another flat & they paid the shipping. I have shot cases of them thru hammer doubles as well as Damascus and all were lethal. I truly belive that the shorter cartridge, i.e. shorter shotstring, is very beneficial at reasonable distances. Although I do shoot the PolyMag(or Kent Baby Mag), of course thru a double with the proper proof barrels, as a last resort to down the wile pheasant that was hit or wounded but was attempting to escape.
Kind Regards,
Raimey rse
|
|
|
|
Joined: Jun 2004
Posts: 646
Sidelock
|
Sidelock
Joined: Jun 2004
Posts: 646 |
I have heard a few clay shooters say that the Polywads burn a little dirty, but that is the only negative. But all dealings I have had with them have been pleasant. I have requested #5s for pheasants but haven't gotten an answer. Once, they sent a flat of the wrong shot size & wanted to issue a UPS pickup. I told them to just send me another flat & they paid the shipping. I have shot cases of them thru hammer doubles as well as Damascus and all were lethal. I truly belive that the shorter cartridge, i.e. shorter shotstring, is very beneficial at reasonable distances. Although I do shoot the PolyMag(or Kent Baby Mag), of course thru a double with the proper proof barrels, as a last resort to down the wile pheasant that was hit or wounded but was attempting to escape.
Kind Regards,
Raimey rse Why would a shorter hull make for a shorter shot string? 1oz of shot in a 16 gauge, should have the same shot string, weither the hull is 2-1/2" 2-9/16" or 2-3/4"
|
|
|
|
Joined: Aug 2007
Posts: 10,869 Likes: 201
Sidelock
|
Sidelock
Joined: Aug 2007
Posts: 10,869 Likes: 201 |
I was referring to the powder capacity(available volume). More powder ignited(or faster burning to get a certain pressure) just lengthens the shotstring for a given load. An ounce of shot is an ounce of shot but for the most part, the 2 3/4's you will find on store shelves are loaded to cycle a semiauto.
Kind Regards,
Raimey rse
|
|
|
|
Joined: Jun 2004
Posts: 646
Sidelock
|
Sidelock
Joined: Jun 2004
Posts: 646 |
I don't think powder capacity has anything to do with shotstring either. The speed of the shot leaving the muzzle might. But this has nothing to do with pressure.
|
|
|
|
Joined: Sep 2006
Posts: 46
Sidelock
|
OP
Sidelock
Joined: Sep 2006
Posts: 46 |
Doug, If many short chambered (Flues) frames cracked when trying to digest 2 3/4 inch paper shells, (many cracked before the advent of plastic hulls, so we know) doesn't it stand to reason that barrel bursts could occur under those same conditions? Please explain how nitro proofed barrels, by Ithaca, are more dangerous than Remington twist or damascus barrels that are also nitro proofed...not all composite barrels are nitro proofed, but I think Kurt is inferring that his barrels are marked "for smokeless powder" ... Isn't his biggests concern the 2 9/16ths short chamber? And the possibility of putting a 2 3/4 inch shell into it?
...used with light loads, careful observance to the chamber lengths, and never paper shells, make these 20ga Flues still shootable to some degree...I think this concept applies to all 20 & 16 ga Ithaca Flues models, as most if not all 20ga & 16ga were short chambered...fluid or otherwise...
I'm not saying that I'm right and you're wrong, only that this was the thinking that was conveyed to me 30 years ago when I bought my first Ithaca Flues (16ga). Has this thinking been overturned? These barrels have no markings on them stating that they are for smokeless powder. Actually,there are no markings on these barrels anywhere exept the serial number on the barrel flat a V on the lug. I was just wondering if all the fluid steel barrels were marked as such. I have not shot the polywad vintagers but have shot the low pressure 12ga federal vintage shell and they are dirty. The low pressure 12 gauge reloads with 700-X seem to be cleaner burning. KjD
|
|
|
|
Joined: Feb 2002
Posts: 1,096
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,096 |
|
|
|
|
Joined: Sep 2006
Posts: 46
Sidelock
|
OP
Sidelock
Joined: Sep 2006
Posts: 46 |
That crack doesn't look good. Doesn't seem like it would happen with the top locking bolt. Where would the barrel maker stamp be located. I am assuming on the bbl flat??
|
|
|
|
|