|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
4 members (Hoot4570, eightbore, SKB, 1 invisible),
440
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,499
Posts545,467
Members14,414
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Dec 2006
Posts: 3,218 Likes: 121
Sidelock
|
OP
Sidelock
Joined: Dec 2006
Posts: 3,218 Likes: 121 |
Hi all, I know this has been covered before, but no real answer to the question.
So...I'll ask again.
Has anyone used the suggested Galazan method of using vasoline on their pads, buffing it out then applying Tru-Oil to keep the sheen?
I was wondering if the Tru-Oil would crack over time?
Or does anyone have another method that would work?
I'm not so much interested in getting the pad slick, more into the color aspect.
Thanks as always!!!!
Greg
Gregory J. Westberg MSG, USA Ret
|
|
|
|
Joined: Feb 2008
Posts: 518 Likes: 4
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 518 Likes: 4 |
I tried it once using a buffing wheel and was wholly unimpressed. At this point in time I'm more inclined to use a very fine abrasive/polish and then let the pad assume a natural look from honest use.
|
|
|
|
Joined: Feb 2008
Posts: 518 Likes: 4
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 518 Likes: 4 |
I tried it once using a buffing wheel and was wholly unimpressed. At this point in time I'm more inclined to use a very fine abrasive/polish and then let the pad assume a natural look from honest use.
|
|
|
|
Joined: Dec 2004
Posts: 138
Sidelock
|
Sidelock
Joined: Dec 2004
Posts: 138 |
The pad maker suggests polishing "using white spirit or lamp parafin with wet and dry polishing followed by a light varnish". What exactly that means I have no idea.
|
|
|
|
Joined: Apr 2005
Posts: 1,117 Likes: 92
Sidelock
|
Sidelock
Joined: Apr 2005
Posts: 1,117 Likes: 92 |
I have used a few of these pads and there is not much you can do about the color, although they do tend to darken with use. I use very fine sandpaper (400 grit and up), cut into strips, and round the edges by sanding across the face. I then apply Armour All.
|
|
|
|
Joined: Mar 2005
Posts: 680
Sidelock
|
Sidelock
Joined: Mar 2005
Posts: 680 |
I have had pretty good luck ageing my Silvers and Jostam pads using a combination of breakfree, quail blood, burnt powder residue and dog slobber. Sorry I can't give you the exact amounts but I'm inclined to think there was a lot more dog slobber, breakfree and powder residue than quail blood.
|
|
|
|
Joined: Dec 2001
Posts: 496 Likes: 12
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 496 Likes: 12 |
I would try the black muck from the bottom of a prairie pothole. That stuff stains waders it should do the same to a rubber pad.
|
|
|
|
Joined: Jan 2002
Posts: 7,703 Likes: 103
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 7,703 Likes: 103 |
That pothole mud idea might be good. I used to duck hunt in an effluent pond down from a local paper mill. That stuff would not only stain your rubber waders, but it would change the color of your zipper and the change in your pocket to purple if you got in over your wader tops...Geo
|
|
|
|
Joined: Mar 2006
Posts: 1,232
Sidelock
|
Sidelock
Joined: Mar 2006
Posts: 1,232 |
Yeah, Twicebarrel has it right.
I use duck blood, blue mud, and bacon grease on mine.
DLH
Out there at the crossroads molding the devil's bullets. - Tom Waits
|
|
|
|
Joined: Jun 2010
Posts: 91
Sidelock
|
Sidelock
Joined: Jun 2010
Posts: 91 |
have to agree with twice barrel, though i used to use grouse blood but they're pretty scarce around here. NC PA
N Central PA NRA Endowment
|
|
|
|
|
|