[Linked Image from i.imgur.com]

This .300 Savage Model 45 is fitted with a Geco branded scope. According to the Internet these post war scopes with this style of elevation turret cap was made for various German retailers by Schmidt and Bender in their early days.

windage adjustments are in the rear mount by 2 opposing screws. The rings are 3.375 apart (centre to centre).

At present it is shooting 4.5 inches right at 100 yards.

Do any forum members have any experience in knowing how much in Minutes of Angle a half or full turn by the pushing screw (after slackening off the opposing screw) will shift the MPI?

Last edited by Parabola; 02/04/24 01:05 PM.