Looking for a set of modern 12ga 30” barrels or a source for barrel blanks for a sleeve job. I say modern because the owner wants to shoot steel shot.

Anybody know a source for blanks? Have a set of Steven’s 311 barrels laying around?

Thanks,
Bryndon

Would it be easier to start with like a plain barrel 870 barrel? Those can be found fairly cheap on EBay most times. Or would they have the wrong contouring?

I have been looking for two sets of steel 30 inch sleeve tubes for quite a while I have had to use other barrels to make sleeves.pump shotgun barrels that are threaded to the action work but are usally very heavy I have a lead if it works out I will,let you know

I would think you problem might be contouring but then you can simply strike up a lone tubes on a lathe.
Another snag may be the modern alloys used by many modern barrel manufacturers. We hit this snag using modern alloy sleeving tubes some years back which when welded gave a very different black finish to the original stubs. Only an aesthetic problem of course but it may be a consideration for your client.
The tubes used in the UK come from Italy mainly, there are a couple of companies doing them, one is part of the Beretta clan, Franco Beretta I think.
However, in the UK this has all become rather expensive and complicated by Brexit whereby stuff that was duty free before is now (sometimes) subject to duty.
Of course nothing has changed for the USA importing from Europe.
I suggest that if you go this route, you insist that the tubes are listed as 'Steel tube' on the commercial invoice, firearms not being mentioned at all. After all, until chambered that is exactly what they are.
This should make life much easier for both importer and exporter.

Thanks to all for the replies. I think I have a solution for this time but if your lead comes to fruition please let me know as I will buy a few sets to have on hand. Seems like these specialty items are becoming more difficult to source every year

You might be able to get blank tubes from these folks. Hasting barrels

http://www.hastingsbarrels.com/#:~:text=The%20Hastings%20Metro%20Barrel%20is%20ported%2C%2012ga%2C%2032-inch%2C,choice%20for%20sportsmen%20pursuing%20quarry%20in%20suburban%20areas.

Track of the wolf carries 20ga barrels, you might want to contact them for a source of 12ga barrels

https://www.trackofthewolf.com/List/Item.aspx/655/1

I talked to them and the barrels are basically bored 729 and a 1.5 on the od a lot of machining to make a sleeve tube I think they were 100.00

I was in contact with https://www.midlandsgunservices.com/ last week and they informed me that they no longer offer sleeving but were happy to sell the remaining sleeving tubes they have for 300 GBP a set. I can import them for you if you are not in a hurry.

Bryndon,
I would look carefully at the 311 tubes, as a lot of them, later guns from Savage, were brazed together.

That’s good info Dennis - Thanks!

ER Shall in Pa offers 12ga rifled blanks. They will do custom runs but you may have to buy a big lot. Maybe you can talk them into offering properly contoured barrels for this purpose.

I was looking for raw material a while back for 12 ga, one of my favorite suppliers has 4130 seamless in 36" lengths with a 1.125 OD and a .625 ID for around $85 ea. if i recall correctly.

Link: https://www.onlinemetals.com/buy/al...ound-tube-4130-cond-n-seamless/pid/20626

There will definitely be some Quality Time spent on the lathe with those... but you could make it into whatever you wanted.

With access to a cnc lathe those tubes would be just the ticket! Thanks for the link!

Bryndon

Also notice that’s your first post - welcome to the board. This is the premier place to discuss double guns.

We shaw has tubes bored 729 I think 40 inches long 1.5 od 95.00