|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
0 members (),
774
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics39,490
Posts562,009
Members14,584
| |
Most Online9,918
Jul 28th, 2025
|
|
|
|
Joined: Mar 2007
Posts: 236
Sidelock
|
OP
Sidelock
Joined: Mar 2007
Posts: 236 |
question for the xperts, regarding a parker hammer gun must the rib matting end a short distance from the muzzles as normal for a hammerless parker? or did the matting on parker hammer guns run right to end of the rib at the muzzles? thanks for replies.
joe
|
|
|
|
|
Joined: Feb 2002
Posts: 14,447 Likes: 278
Sidelock
|
|
Sidelock
Joined: Feb 2002
Posts: 14,447 Likes: 278 |
In both hammer and hammerless Parkers, the matting may or may not run to the end. Most have the space, but original guns with matting that runs to the end have been found. Best to measure the bores and chokes and/or get a PGCA letter to document the original length.
|
|
|
|
|
Joined: Nov 2006
Posts: 3,475 Likes: 54
Sidelock
|
|
Sidelock
Joined: Nov 2006
Posts: 3,475 Likes: 54 |
What about checking the S/N against the book to confirm barrel length?
|
|
|
|
|
Joined: Nov 2005
Posts: 1,274 Likes: 1
Sidelock
|
|
Sidelock
Joined: Nov 2005
Posts: 1,274 Likes: 1 |
What about checking the S/N against the book to confirm barrel length? That does not always work, I have an early lifter hammer gun that is 10 gauge with 28" barrels and straight grip that the letter confirms as original, however the Id and serialization book shows it as 30" with pistol grip?? Jim A.
I learn something every day, and a lot of times it's that what I learned the day before was wrong
|
|
|
|
|
Joined: Jul 2008
Posts: 454 Likes: 4
Sidelock
|
|
Sidelock
Joined: Jul 2008
Posts: 454 Likes: 4 |
The rib matting on my GH Hammerless 12ga runs all the way to the end. The barrels are 28" and have not been cut.
|
|
|
|
|
Joined: Dec 2001
Posts: 2,961 Likes: 9
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 2,961 Likes: 9 |
You may want to check for keels at the end of the tubes.
bill
|
|
|
|
|
Joined: Jan 2002
Posts: 10,134 Likes: 124
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 10,134 Likes: 124 |
eightbore got hit rat! so due bill s.
Last edited by ed good; 01/27/10 04:52 PM.
keep it simple and keep it safe...
|
|
|
|
|
Joined: Nov 2003
Posts: 619 Likes: 43
Sidelock
|
|
Sidelock
Joined: Nov 2003
Posts: 619 Likes: 43 |
FYI,
I own a GH-16ga that letters with 30" barrels and they measure 30" dead-on. The rib matting goes all the way to the end of the rib and the keels are in place.
This bit in the Parker story about the blank space at the end of the rib matting is not a hard and fast rule. I wonder how many nice 26" barreled Parkers have been passed over because the matting went to the end of the rib?
|
|
|
|
|
Joined: Mar 2006
Posts: 1,935
Sidelock
|
|
Sidelock
Joined: Mar 2006
Posts: 1,935 |
They've been passed over because all the experts know a 26" gun will be nearly impossible to shoot, what with those missing two inches.
|
|
|
|
|
Joined: Jan 2002
Posts: 5,185 Likes: 67
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 5,185 Likes: 67 |
Does the book also list original chokes? I have to sell a DHE from a friends estate and it would help to know if the chokes (.006 & .020) are original.
My problem lies in reconciling my gross habits with my net income.
- Errol Flynn
|
|
|
|
|
|
|
