I have seen a few guns with 'crooked' barrels in the past. I actually owed a 3200 with the top barrel that was curved so bad you can see it very easily just by looking down the top of the barrels as if sighting. The rib was factory brazed, secure and straight, while the barrel swooped out to the side then back in. All indications were it was built that way. The lower barrel was straight. I also saw a 101 with similar problems, as well as a Grulla sxs that barrels that curved upward quite a bit. The Grulla may have been altered or built that way, I couldn't tell.

Hopefully, someone like Eyster can remedy the problem or Rizzini can be convinced they built a clunker that they don't want out there tainting their name.