Thanks for the comment Joe. I think it would be the Bees Knees to set the Winder up to eject a Hornet case.
Fitz...I experience some misfire issues with my musket after I had it relined. Everything related to the fit of the extractor/ejector seemed normal. Finally, after I discussed the problem on the ASSRA forum, and posted a picture of the firing pin, Bert Hartman pointed out that I had an incorrect (flat tip) firing pin installed in it. I reshaped the tip to a chisel point and it all but totally cured the problem. Joe Steele helped me out with a replacement pin and it works fine now. According to Bert, Winchester changed out the flat tipped pin for a chisel point early in the production. Why it functioned fine for 30 years until I had it relined, I'll never know. Terry H.
