Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com 12 ga. Heading Gage

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

3 members (Carcano, DropLockBob, bushveld), 1,001 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,514

Posts562,219

Members14,590

Most Online9,918
Jul 28th, 2025

Print Thread

Re: 12 ga. Heading Gage David Williamson #185828 04/14/10 03:24 PM
Joined: Jan 2002 Posts: 5,983 Utah Jim Legg Sidelock
Jim Legg Sidelock Joined: Jan 2002 Posts: 5,983 Utah	I don't think that is what you want. That tool is for use whan the rim cut is too deep. It cuts an oversize ring and then you solder a sleeve in and then re-cut the rim area as needed. You should get a chamber reamer. You've shortened the barrels so your chamber is a bit shorter, as well. Page 419 of catalog #62. > Jim Legg <

Entire Thread
Subject	Posted By	Posted
12 ga. Heading Gage	David Williamson	04/13/10 08:05 PM
Re: 12 ga. Heading Gage	eightbore	04/14/10 01:00 PM
Re: 12 ga. Heading Gage	Jim Legg	04/14/10 02:14 PM
Re: 12 ga. Heading Gage	David Williamson	04/14/10 06:01 PM
Re: 12 ga. Heading Gage	Bill Meyer	04/14/10 07:19 PM
Re: 12 ga. Heading Gage	Jim Legg	04/14/10 07:24 PM
Re: 12 ga. Heading Gage	2-piper	04/14/10 07:51 PM
Re: 12 ga. Heading Gage	eightbore	04/14/10 09:15 PM
Re: 12 ga. Heading Gage	David Williamson	04/14/10 10:14 PM
Re: 12 ga. Heading Gage	eightbore	04/14/10 10:28 PM
Re: 12 ga. Heading Gage	Jim Legg	04/14/10 10:29 PM
Re: 12 ga. Heading Gage	David Williamson	04/15/10 12:04 AM
Re: 12 ga. Heading Gage	eightbore	04/15/10 12:27 PM
Re: 12 ga. Heading Gage	David Williamson	04/15/10 01:49 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 1.526s Queries: 17 (0.557s) Memory: 0.8198 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2025-10-14 17:43:14 UTC
Valid HTML 5 and Valid CSS