Mark: As Sheriff Andy Taylor use to say... Just leave it be! It is highly unlikely you will find another triggerguard assembly that will drop in with out any alterations, especially the hinge area which always requires some wood removal for it to open. The hinged floorplate I have come to believe over the years is vastly overated as a convenience,especially if one is hunting alone. On rifles without one [Hinged Floorplate] I simply push the top round down WITH MY FINGERS,watch TO MAKE ABSOLUTELY SURE A ROUND IS NOT STRIPPED AND CHAMBERED. CLOSE THE BOLT AND THEN USE THE SAFETY TO LOCK THE BOLT CLOSED! I HANG A TAG [I made] ON THE BOLT "LOADED GUN" Then case gun. GOOD LUCK Jerry
