roostertails,
I have two NIDs and the stocks wont interchange on them. That's why the serial numbers were stamped on the wood. They had to be hand fit to each particular gun because there are variances between them all. Apparently you didn't notice or have a problem with the fact that there was no wood on the front of the stock you recieved to fit up inside of the receiver either. You probably also didn't notice that the fore arm was a half inch to short for an early NID and almost and inch and a half to short for a later model NID. One thing I noticed is that fifteen days ago you registered here, dug thru a couple pages worth of posts to find mine, made a reply, and haven't made a single post since then. Sounds a little fishy to me.
