Stallones,
I have used 24 gr of PB as my exclusive load for 1 1/4 oz 10 gauge loads for over 8 years at the Vintage Cup. I use a SP-10 wad with a nitro card underneath for roll crimped 2 7/8". If you are fold crimping, skip the nitro card.
When I load 2 5/8s for my old Boswell 10 hammer, I use the same wad/shot but drop the nitro card (still roll crimping).
This load has won a few times in 10 ga events and it is easy on gun/hull.
Joe
Joe I have a couple nice load using Solo 1250 using Federal plastic and Winchester paper hulls trimmed to 2 7/8th inches but unfortunately Solo 1250 has been discontinued. What hull(s) are you using and what is the velocity and chamber pressure for your PB ounce and a quarter loads?
