S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,924
Posts550,752
Members14,459
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Feb 2002
Posts: 14,209 Likes: 223
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 14,209 Likes: 223 |
If you really want to know the true chamber length, you have to do a visual with a machinist's scale and proper light. Another fairly accurate way is to actually take a micrometer reading of the entire chamber to the bore, an eighth of an inch at a time. A hard chamber gauge can easily give a 1/4 inch inaccurate reading in a slightly oversized factory chamber. Your chamber could be a perfectly correct 2 3/4" chamber when properly measured.
|
|
|
|
Joined: Dec 2001
Posts: 6,303 Likes: 222
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 6,303 Likes: 222 |
12 over C in a diamond means gauge at chamber , with chamber lengths 3" or less. 12 over LC in a diamond means the gun has LONGER than 3" chambers.
|
|
|
|
Joined: May 2010
Posts: 1,534 Likes: 95
Sidelock
|
Sidelock
Joined: May 2010
Posts: 1,534 Likes: 95 |
In my humble opinion the only acurate way of confirming a chamber depth is to use a plug gauge.Turned up to approved British proof size. Others have disagreed with me on this. I could not see to well on the photo ,but it would appear to be black powder only.What are the rest of the barrel dimentions.
|
|
|
|
Joined: Jan 2006
Posts: 15,457 Likes: 88
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 15,457 Likes: 88 |
I think he's more concerned if the chamber length is original.
|
|
|
|
Joined: Dec 2001
Posts: 12,743
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 12,743 |
In my humble opinion the only acurate way of confirming a chamber depth is to use a plug gauge.Turned up to approved British proof size. Others have disagreed with me on this. I could not see to well on the photo ,but it would appear to be black powder only.What are the rest of the barrel dimentions. That may well be right if you deal only with good quality British built guns. Throw in a good mix of both Continental & American ones & I can "Positively Assure" you it is not the case. Not all makers used absolute British specs for minimum chamber size. If I recall correctly British specs call for a minimum chamber dimension of .800" (12ga). Drawings for the American L C Smith for instance show a dimension of .798" (12ga). With a taper of .005" per inch in the chamber walls a.002" smaller chamber dimension than the plug will stop it more than 3/8" short, .400" to be exact. In this case the 6" flexible scale 8-Bore cited is much more accurate. In spite of the fact I have a nice set of gages I turned up myself to SAAMI spec size I encountered enough pre-SAAMI guns having chambers a thou or two undersize that I seldom use them anymopre, relying instead on that Starrett 6" scale.
Miller/TN I Didn't Say Everything I Said, Yogi Berra
|
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
12 over C in a diamond means gauge at chamber , with chamber lengths 3" or less. 12 over LC in a diamond means the gun has LONGER than 3" chambers. I spot a disagreement here between Baron Engelhardt and Lee Kennett. Engelhardt says the LC mark applies to "10, 12, and 14 gauge having chambers of 3" or longer, and those of 16 to 32 gauge having chambers 2 3/4" and longer". Kennett says: "To distinguish shotguns using the longer shells, those with chamber lengths of 3" or more were to bear the nominal gauge in a lozenge, along with the letters LC, for long chamber." Usually they're in agreement, with the Kennett material simply updating Engelhardt through the 1955 rules of proof. Based on the serial number and the "maximum" marking on the barrel flats, that gun probably dates from 1903-04.
Last edited by L. Brown; 02/06/11 06:59 PM.
|
|
|
|
Joined: May 2010
Posts: 1,534 Likes: 95
Sidelock
|
Sidelock
Joined: May 2010
Posts: 1,534 Likes: 95 |
Miller,I did say "to British proof size" were there is a maximum and minimum ,there is also a tolereance on the length. I can send them to you. You and I are not going to agree on this subject and I dont want to get into a protracted argument that is neither helpful or relevant to the original question. Homless joe says"He is more concerned with the chamber length than the proof status" , well it depends on what you want to shoot out of it and how much you value your fingers.
|
|
|
|
Joined: Jan 2006
Posts: 15,457 Likes: 88
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 15,457 Likes: 88 |
Looking at the proof marking and the suspected chamber length combined with living the good life in American it would appear that only Greener can tell us if the gun was originally 3" chambered.
|
|
|
|
Joined: May 2008
Posts: 8,158 Likes: 114
Sidelock
|
Sidelock
Joined: May 2008
Posts: 8,158 Likes: 114 |
Did anyone besides me notice the trade mark sheaf of wheat stamped on each tube just forward of the flats- those are Sir Joseph Whitworth steel barrels--in the same quality realm as German Krupp Flustahl and Swedish Bofors barrel steels-- Nice find-
"The field is the touchstone of the man"..
|
|
|
|
Joined: Dec 2001
Posts: 6,303 Likes: 222
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 6,303 Likes: 222 |
Larry, I was quoting from Wirnsberger on the 12/C and 12/LC rules. I have a W. Betts pigeon gun with 12/C, three inch chambers, and proofed for 1 1/2 oz and marked 3" on each barrel flat. It was made in the 1920s, I think. One often sees British guns, especially Greeners, chambered for 2 1/2" shells and 1 1/4 oz of shot, but I don't think I have ever seen 2 1/2" chambers proofed for 1 1/2 oz. of shot in a British gun.
Englehardt seems to be wrong according to examples like above. Also have a Cashmore Nitro marked 12/C and and "3 inch cases". Have a Greener Monarch Imperial marked 16/C and "2 3/4" case". Both of these markings seem to contradict Englehardt as you quote him.
Last edited by Daryl Hallquist; 02/07/11 12:11 PM.
|
|
|
|
|