|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
0 members (),
472
guests, and
4
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics39,500
Posts562,122
Members14,587
| |
Most Online9,918
Jul 28th, 2025
|
|
|
|
Joined: Dec 2010
Posts: 93
Sidelock
|
OP
Sidelock
Joined: Dec 2010
Posts: 93 |
I have Beretta Black Onyx and it has a little bit of rust on action and barrels. What is the best way to treat this without hurting the finish?
Also there are some scratches on the stock. Is there any kind of oil or finish that will match to the original finish?
|
|
|
|
|
Joined: Jan 2006
Posts: 15,462 Likes: 89
Sidelock
|
|
Sidelock
Joined: Jan 2006
Posts: 15,462 Likes: 89 |
If it has a matte blue finish I'm not sure if there is a safe way to clean off rust ?
|
|
|
|
|
Joined: Jul 2010
Posts: 21
Boxlock
|
|
Boxlock
Joined: Jul 2010
Posts: 21 |
"000" steel wool with gun oil on it. Will take rust off without taking the blueing off. You will still have bare metal where the rust was but surronding blueing will be fine. Larry
|
|
|
|
|
Joined: Jun 2009
Posts: 314
Sidelock
|
|
Sidelock
Joined: Jun 2009
Posts: 314 |
Never use Steel Wool to remove rust. It leaves behind tiny particles of steel, which rusts. Always use Bronze Wool on gun metal.
Last edited by Pre-13 LC Coll; 02/27/11 08:59 AM.
|
|
|
|
|
Joined: Jan 2002
Posts: 4,015
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 4,015 |
Kroil and 0000 steel or agreeably bronze wool. http://www.kanolabs.com/google/Learned about it here many years ago,works great.
Hillary For Prison 2018
|
|
|
|
|
Joined: Dec 2002
Posts: 292
Sidelock
|
|
Sidelock
Joined: Dec 2002
Posts: 292 |
Here is a slightly different approach that works well for me on light rust "freckles". Wet barrels down with liberal coat of transmission fluid. Let sit a few hours and wet again. Then use a new single edge razor blade to gently shave rust spots flat. Use short strokes. Keep spot you are working on wet. If blade loses its pritine edge, switch to new blade. End result looks good, feels smooth, but must thereafter be kept clean & lubed to keep any rust below surface from "re-activating".
A Springer Spaniel, a 6# double and a fair day to hunt.
|
|
|
|
|
Joined: Jul 2002
Posts: 1,619 Likes: 7
Sidelock
|
|
Sidelock
Joined: Jul 2002
Posts: 1,619 Likes: 7 |
I have used an approach similar to Erik W, only I sharpen a Copper Penny and used it to "Shave" the rust spots. Whatever you use go slow and easy, don't over do it.
Mine's a tale that can't be told, my freedom I hold dear.
|
|
|
|
|
Joined: Feb 2008
Posts: 11,786 Likes: 673
Sidelock
|
|
Sidelock
Joined: Feb 2008
Posts: 11,786 Likes: 673 |
I have been wanting to try boiling a set of patina (nice name for rusty) barrels to try to convert the red oxide to black as in rust blueing. Has anyone tried this approach?
Voting for anti-gun Democrats is dumber than giving treats to a dog that shits on a Persian Rug
|
|
|
|
|
Joined: Dec 2010
Posts: 93
Sidelock
|
|
OP
Sidelock
Joined: Dec 2010
Posts: 93 |
Most of the marks are faint freckles. The main "staining" is on the rim of the breech. Which method would you all recommend? Scrape or bronze wool?
|
|
|
|
|
Joined: Nov 2006
Posts: 3,475 Likes: 54
Sidelock
|
|
Sidelock
Joined: Nov 2006
Posts: 3,475 Likes: 54 |
If you have a matte finish, scraping will ruin it. Razor blade will ruin it. If it is matte on a Beretta Onyx, it might be their Bruniton finish, which (I think) is actually a film, and should not rust unless the film itself has been damaged. I'd try the least aggressive approach that I could get away with, which for me means starting with light oil and a bit of stainless steel scrubbing pad from the hardware store. If it's a high polish blue, any of the techniques mentioned will work.
|
|
|
|
|
|
|
