I had a drilling that I imported from the UK. It was a Sauer. the rifle barrel was redone as a 222 Rem, complete with rimless extractor. worked like a champ. The rifle barrel was monoblocked. They cut the 8x57JR barrel off at about 3 inches and then fir a 22 barrel into it and it obviously matched the contour of the roginal barrel. all soldered together and re rust blued. Unless you pulled the forend off and looked for the joint, you would have thought it was made that way. All the work was done in the UK, complete with proofs.
Last edited by Brian; 02/28/11 08:44 PM.
