|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
Forums10
Topics40,271
Posts572,823
Members14,687
| |
Most Online32,084
Jun 14th, 2026
|
|
|
|
Joined: Feb 2006
Posts: 3,862 Likes: 124
Sidelock
|
Sidelock
Joined: Feb 2006
Posts: 3,862 Likes: 124 |
Unless you know the bore, it is really useless, but I believe it would be the ring inside.
David
|
|
|
|
|
Joined: Jan 2006
Posts: 15,465 Likes: 89
Sidelock
|
|
Sidelock
Joined: Jan 2006
Posts: 15,465 Likes: 89 |
Send it back while you still can.
|
|
|
|
|
Joined: Jan 2002
Posts: 5,954 Likes: 15
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 5,954 Likes: 15 |
The true reading is exactly at the muzzle. This tool is only "advisory." Constriction must be measured at the start of the choke taper and at the minimum diameter; this should be at the muzzle or a bit back if the choke is cut with a parallel that has gotten cut divergent. Don't worry about exacting measurements. Shotguns are sufficiently variable pattern to pattern (shot to shot) that choke is an average. It takes several thou difference in constriction to really make much difference in practical performance.
|
|
|
|
|
Joined: Dec 2001
Posts: 3,974 Likes: 108
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 3,974 Likes: 108 |
Both of the respondants are correct: the tool is totally worthless in the extreme! If all guns were bored to the exact nominal diameter of their gauge it'd be fine but the majority are either overbored or underbored. It's very easy for the error to exceed 20 thousanths....or more. Get a refund!
John McCain is my war hero.
|
|
|
|
|
Joined: Jan 2002
Posts: 5,976 Likes: 172
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 5,976 Likes: 172 |
Oh, now they make them out of aluminium. That makes them even more useless. The brass ones could at least be used as a decoy anchor.
|
|
|
|
|
Joined: Jun 2007
Posts: 335 Likes: 27
Sidelock
|
|
OP
Sidelock
Joined: Jun 2007
Posts: 335 Likes: 27 |
Tough love indeed, but thanks for the feedback! I have to send another item back (screws that aren't the right size), so I may send the gauge back too. I did think it might be handy to take to a show to get a rough idea of chokes.
|
|
|
|
|
Joined: Jan 2006
Posts: 15,465 Likes: 89
Sidelock
|
|
Sidelock
Joined: Jan 2006
Posts: 15,465 Likes: 89 |
I did think it might be handy to take to a show to get a rough idea of chokes. Usefull as teets on a bore hawg
|
|
|
|
|
Joined: Feb 2002
Posts: 14,641 Likes: 343
Sidelock
|
|
Sidelock
Joined: Feb 2002
Posts: 14,641 Likes: 343 |
That gauge will not tell you anything about a bore or a choke. You need Galazan's $125 bore micrometer. To measure 12-28, you need two of them. Brownell sells the identical gauge for under $100 under the "Skeet's" name.
|
|
|
|
|
|
|
