S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,934
Posts550,858
Members14,460
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Jul 2005
Posts: 7,065
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 7,065 |
Oh, now they make them out of aluminium. That makes them even more useless. The brass ones could at least be used as a decoy anchor. Laughed out loud. thanks, Mike
I am glad to be here.
|
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
As indicated above, the drop-in gauge only works if bore diameters are "standard" (12ga = .729, etc). I have a German 20ga that's a solid improved cylinder (.007) in one barrel. My drop-in Galazan gauge shows no choke. Because that particular gun is marked 19 on the barrel flats, I know it's overbored by at least .010 from the 20ga standard of .615--so the overbore results in an incorrect reading. You need a tool that measures both bore diameter and constriction.
|
|
|
|
Joined: Dec 2001
Posts: 3,966 Likes: 96
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,966 Likes: 96 |
Actually they're valuable in the right hands. When I'm looking at a vintage gun for sale I always ask what kind of tool they used to measure the choke. Often they've listed it as cylinder/cylinder. If it was one of the drop-in gauges then I know there's a pretty good chance the gun has more choke than the seller thinks. Some years ago I bought a great 32" Parker that was listed for sale as improved cylinder. I made the inquiry, knowing those early guns were generally way overbored. The seller had used one of those awful tools. Well, most people were turned away from it but I took the chance. Low and behold it carries original .035 chokes in both tubes and the gun is close to being in new condition! Lesson learned.
John McCain is my war hero.
|
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
Joe, I ran a bore and choke gauge in one of those old Parkers, and discovered the bores were about .750. That'll hide a lot of choke, if you're using a drop-in gauge.
|
|
|
|
Joined: Feb 2002
Posts: 14,211 Likes: 224
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 14,211 Likes: 224 |
A Merkel, for example, if sawed off at the 20" mark, would check out on the drop in "gauge" as a strong improved cylinder or weak modified. A skeet bored gun with an almost invisible dent at the muzzle may check out as a full choke gun using the drop in "gauge".
|
|
|
|
Joined: Jan 2002
Posts: 1,435 Likes: 1
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 1,435 Likes: 1 |
I polished mine up with Brasso. Looks useful and cool on the shelf in my little gun room!
|
|
|
|
Joined: Feb 2006
Posts: 1,602 Likes: 14
Sidelock
|
Sidelock
Joined: Feb 2006
Posts: 1,602 Likes: 14 |
Mine's aquiring a nice patina from lack of use.
|
|
|
|
Joined: Jan 2002
Posts: 7,715 Likes: 114
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 7,715 Likes: 114 |
Okay, I know the brass guage isn't reliable for exact choke measurement, but it will tell me whether the chokes are open or tight at least as well as a dime will in a 12ga bore, and the drop-in is good for all guages whereas a dime is not. That's all I really need to know at a gunshow.
Its nice too to tell when a set of barrels has been reamed way out. I once dropped my brass choke guage into an otherwise nice looking LC Smith 12ga and it fell all the way down through the chamber; the quick thinking seller piped up that he'd need to charge more for the gun since it was obviously a sought after 10ga instead of a run of the mill 12ga...Geo
|
|
|
|
Joined: Jul 2005
Posts: 7,065
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 7,065 |
Okay, I know the brass guage isn't reliable for exact choke measurement, but it will tell me whether the chokes are open or tight at least as well as a dime will in a 12ga bore, and the drop-in is good for all guages whereas a dime is not. That's all I really need to know at a gunshow. George I don't think either the gauge or the dime tell you anything. With either the choke could be full or be cylinder. I have seen twelve gauge BORESs run from .707 up to .750. I still think the remark about using the gauges for a duck decoy anchor was very accurate. Best, Mike
I am glad to be here.
|
|
|
|
Joined: Apr 2002
Posts: 6,812
Sidelock
|
Sidelock
Joined: Apr 2002
Posts: 6,812 |
The road to hell is paved with all the fools I've been and yet I somehow avoided buying a "ring sizer" choke gauge. An 80$ Skeets will tell you all you need to know of bore and choke--at least in 12 and 16 gauge.
jack
|
|
|
|
|