Hi, I was reading about bbl flip on SxS's, and the thought came to me that porting the bbls might be the answer to remedy this.
I think I'm going to have my Hussey Imperial Ejector be the Guinea Pig on this one.
I'm going to have my son take the bbls to his shop class and drill the holes, then smooth out the bores with some sandpaper or something in the shop. Then will test and see if it works.
So....what do you think?
Regards
Greg
You know, if it does not work cut the barrels off at 25 in and you will have the perfect gun. The boy ought to be able to find a hacksaw in shop class. They might even have a power hacksaw. Just buff barrel edges on the belt sander when done and the old girl ought to be good to go again. You can peen around the barrels for the last inch and half to put some choke back in them as well.
