Re Armorall -
I ran into a reference on another forum (SGW) about a method shown on Rimfire Central, the thread on FRC was "woodstocks amazin
stock finish" - log on to RFC, do a search for "armorall".
Author used Truoil, but I found Watco Danish Oil seems to work also.
Essentially, you spritz on a teeny amount of Armorall, and then rub on/in a finger tip or two of truoil, rubbing till it feels dry, then repeat. The author claimed 30 coats in an evening were possible. The armorall seems to solidify the oil very quickly.
I tried it, and it does seem to work. Seemed to fill the wood well.
Gave a nice glow, can be dulled if too shiney.
Your experience may differ.
