|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
31
|
|
|
|
|
|
|
|
Forums10
Topics40,332
Posts574,112
Members14,696
| |
Most Online32,084
Jun 14th, 2026
|
|
|
|
Joined: Dec 2006
Posts: 3,365 Likes: 440
Sidelock
|
OP
Sidelock
Joined: Dec 2006
Posts: 3,365 Likes: 440 |
Hi all, well for all you damascus guys, what is a good way to clean and care for the exterior of the bbls? Same as any other bbls?
Any tips or tricks would be great!!
All the best!
Greg
Gregory J. Westberg
MSG, USA
Ret
|
|
|
|
|
Joined: Aug 2008
Posts: 979 Likes: 51
Sidelock
|
|
Sidelock
Joined: Aug 2008
Posts: 979 Likes: 51 |
Greg, I like a coat or two of tru oil on mine, with frequent gun oiling and/or waxing after use. Curious what other gents here like also.
|
|
|
|
|
Joined: May 2010
Posts: 279 Likes: 9
Sidelock
|
|
Sidelock
Joined: May 2010
Posts: 279 Likes: 9 |
I had a set of Parker-made 'Twist Steel' barrels restored by Brad Bachelder. He told me to keep them covered with Johnson's Paste Wax. I have heard a lot of good reports about applying Tru Oil after a good cleaning.
GMC(SW) - USN, Retired (1978-2001)
|
|
|
|
|
Joined: Dec 2006
Posts: 3,365 Likes: 440
Sidelock
|
|
OP
Sidelock
Joined: Dec 2006
Posts: 3,365 Likes: 440 |
Hi all and many thanks!! So.....tell me about the Tru Oil. Could I get the details on how to apply it? Just wipe on after oiling or what? Also, with the Tru Oil, will that prevent any rust or corrosion?
Thanks again, I'm all ears!!
Greg
Gregory J. Westberg
MSG, USA
Ret
|
|
|
|
|
Joined: Jan 2002
Posts: 1,441 Likes: 5
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 1,441 Likes: 5 |
I like the paste wax idea better than the tru-oil but I just keep them covered with a very light coat of CLP. The browining looks the same now as it did 8-9 years ago.
|
|
|
|
|
Joined: Jan 2010
Posts: 683
Sidelock
|
|
Sidelock
Joined: Jan 2010
Posts: 683 |
I read an article on it and it said Formby's Tung Oil had restorative properties. So I bought some and tried it: it's about like Tru Oil except thinner.
|
|
|
|
|
Joined: Jan 2006
Posts: 10,042 Likes: 646
Sidelock
|
|
Sidelock
Joined: Jan 2006
Posts: 10,042 Likes: 646 |
Last edited by Drew Hause; 06/08/11 12:35 PM.
|
|
|
|
|
Joined: Feb 2006
Posts: 3,863 Likes: 124
Sidelock
|
|
Sidelock
Joined: Feb 2006
Posts: 3,863 Likes: 124 |
Oscar Gaddy had in his article about re-rust blue and etching of barrels, he suggested motor oil or linseed oil.
I have found out when I re-rust blue/etch that the boiled linseed oil put on very thin with a cottom ball is a very good way. The linseed oil hardens and if you are careful enough to put it on thin, it will look great and stay that way.
I have used the motor oil too, but I had places where some very light rust has formed, but this was with barrels just re-rusted. Now if you are only worried about keeping your barrels free of rust, I'm sure the other methods work good, but to me the boiled inseed oil really protects it and gives it a nice shine.
David
|
|
|
|
|
Joined: Jun 2007
Posts: 329 Likes: 14
Sidelock
|
|
Sidelock
Joined: Jun 2007
Posts: 329 Likes: 14 |
Guys get some motor oil heat a small amount of vasaline and stir it in even when wiped over it will leave a protective sheen on the barrels,I put this on all my finished barrels I never get any after rust.
|
|
|
|
|
Joined: Apr 2006
Posts: 722
Sidelock
|
|
Sidelock
Joined: Apr 2006
Posts: 722 |
I've been happy with Ballistol.
|
|
|
|
|
|
|
