Set the press up for 2 3/4 inch hulls.

THEN

You can use the 600 JR with out die adjustment for 2 1/2 inch hulls
if you will take a penny and epoxy it in the middle of a quarter.
Use the 26 cents, penny down in the crimp starter and final crimp stations under the hull.
Only thing needing change is the shot and powder stuff.
Done.

Mike

Last edited by skeettx; 07/05/11 04:08 PM.
USAF RET 1971-95 [Linked Image from jpgbox.com]