Most of the stock from Numrich for hammerless guns will be for the FW frame.
The screws that will work for both frames; the front trigger plate screw, top lever screw, and some of the internal bridle screws.
The side plate connecting screw for the FW frame is shorter, and you don't want to use that in a Regular frame. If you do and make it flush and oriented right, you will put more pressure between the two locks and it could be possible that the sears might rub each other and you will get a double fire.
Since your gun is a FW frame, you will be ok with the screws they sell, but don't expect them to orientate to the gun, especially the front trigger plate screw.
The way that has to be done is make the screw head longer, put a slot in it, put lay-out blue on head, tighten and mark for orientation. Measure depth of recess in trigger plate and make head that depth. Saw new slot, polish and blue and install.
A lot of work, but that is what has to be done to make it look right.
Good luck and let us know how you make out, and thanks for thinking of our Thanksgiving celebration.
