doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Remington Model 32 triggersmith?

The DelGrego gunshop who worked on Parkers, also was the expert on Model 32s. I don't know who carried on their banner, but I think they are still in business. I had a Model 32 Remington Skeet missing an entire forend, Iron and Wood. A Krieghoff replacement fit on almost perfectly. Look at Krieghoff.

I think our member Bill Apperson worked K-guns. He may have a contact.

I did work on K-32's and K-80's,but on several occasions original 32's and early K-32's came in.Different parts.Could not find them and had to make what I could. Even on the modern K's,some parts are restricted.Try Ottsville and hope.I did work on a lot of 2 barreled guns and some were very expensive.A common problem is parts.That is why I like Citori,680 series,P's,K's, and M-21's.

I had a friend who had a gun blueing business for years and I asked him once what was the gun he liked to strip and blue the least, and he said the Rem 3200, so many small parts, a real [censored] to put back together.

I think the Remington site use to have Ahlman's listed as a source of support for the 32/3200.

Ahlman's
9525 W 230th St
Morristown, MN 55052
(507) 685-4244

From the Remington site;

Laib's Gunsmithing
201 Hwy 23 North
Spicer, MN 56288
Phone: (320) 796-2686
Fax: (320) 796-4570
e-mail: plaib@tds.net
Models: M3200 receiver upgrades, rebuild of f/end irons & f/ends, M3200 assorted parts.

--------------------------------------------------------------------------------

Larry Del Grego & Sons
1757 Barringer Road
Ilion, NY 13357
Phone: (315) 894-8754
Models: M31 & M32 Parkers.

Thanks guy's.I shipped it off to Pat Laib yesterday.

I'm sure Laib's will work on anything, but they specialize in the 3200, not the 32. I'm taking all this in enthusiastically, because my 32 is doubling also.

You have a p.m. eightbore.

When all else fails, send it to Krieghoff
Mike