I have found the inlettng wood will soak up easy two coats of super glue with no build up.


Here's where I got the idea; Krazy glue is mentioned.

http://www.picturetrail.com/sfx/album/view/17090409

And here. Also off the Elsie site; Dan May's tutorial.

The remainder of the inletting was then sealed using the same water-thin cyanoacrylate glue that was used to repair the cracks. When applied in this fashion, the glue will find any minute cracks that were otherwise unreachable and will seal the inletting against future oil migration from the action.