doublegunshop.com - home Forums General Discussion Classic & Custom Single Barreled Sporting Rifles @ doublegunshop.com J and R Engineering

September
S	M	T	W	T	F	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30

Who's Online Now

4 members (FallCreekFan, fullandfuller, 2 invisible), 413 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,931

Posts550,844

Members14,460

Most Online1,344
Apr 29th, 2024

Print Thread

Re: J and R Engineering rocky mtn bill #278962 05/22/12 03:21 AM
Joined: Jun 2005 Posts: 412 Likes: 4 Tygh Valley, OR DES/TSD Sidelock
DES/TSD Sidelock Joined: Jun 2005 Posts: 412 Likes: 4 Tygh Valley, OR	Dan; 90 degree and 75 degree have been the product angles from J&R for 30 years. That's what I am use to. I use both pull and push hand tools single line. Segments most used are 5/8" long with 2 degree radius for edges, 3/16" segment for defining lines, 1/16" for tight corners. The handles can be bent to any configuration later. I talked to some people about EDM production for this purpose. No money currently to pursue...good fortune in helping out the industry. Dennis Dennis Earl Smith/Benefactor Life NRA, ACGG Professional member

Entire Thread
Subject	Posted By	Posted
J and R Engineering	rocky mtn bill	04/17/12 05:01 PM
Re: J and R Engineering	gasgunner	04/17/12 05:48 PM
Re: J and R Engineering	Alvin Linden	04/17/12 06:45 PM
Re: J and R Engineering	SDH-MT	04/17/12 06:47 PM
Re: J and R Engineering	Carpetsahib	04/17/12 08:52 PM
Re: J and R Engineering	SDH-MT	04/17/12 10:41 PM
Re: J and R Engineering	keith	04/18/12 01:16 AM
Re: J and R Engineering	RHD45	04/17/12 11:43 PM
Re: J and R Engineering	John Mc	04/18/12 02:47 AM
Re: J and R Engineering	Carpetsahib	04/18/12 03:24 AM
Re: J and R Engineering	J Scott McCash	04/19/12 01:51 AM
Re: J and R Engineering	DES/TSD	04/19/12 05:05 AM
Re: J and R Engineering	Carpetsahib	04/19/12 12:18 PM
Re: J and R Engineering	rocky mtn bill	04/19/12 12:35 PM
Re: J and R Engineering	Carpetsahib	04/25/12 07:25 PM
Re: J and R Engineering	DES/TSD	04/19/12 02:54 PM
Re: J and R Engineering	rocky mtn bill	05/01/12 11:19 PM
Re: J and R Engineering	Alvin Linden	05/02/12 02:42 AM
Re: J and R Engineering	Kutter	05/02/12 04:20 AM
Re: J and R Engineering	Dennis Potter	05/19/12 03:31 AM
Re: J and R Engineering	cgs	05/19/12 12:20 PM
Re: J and R Engineering	cgs	05/22/12 02:30 AM
Re: J and R Engineering	rocky mtn bill	05/19/12 03:48 PM
Re: J and R Engineering	rocky mtn bill	05/19/12 04:14 PM
Re: J and R Engineering	Alvin Linden	05/20/12 01:55 AM
Re: J and R Engineering	DES/TSD	05/22/12 07:21 AM
Re: J and R Engineering	Carpetsahib	05/23/12 03:57 AM
Re: J and R Engineering	rocky mtn bill	06/28/12 01:34 PM
Re: J and R Engineering	SDH-MT	06/28/12 05:26 PM
Re: J and R Engineering	Alvin Linden	06/28/12 10:26 PM
Re: J and R Engineering	cgs	08/31/12 10:24 PM
Re: J and R Engineering	DES/TSD	09/01/12 05:31 PM
Re: J and R Engineering	J.L.Propst	12/30/12 09:10 PM
Re: J and R Engineering	cgs	02/09/13 01:52 AM
Re: J and R Engineering	SR4759	04/29/13 03:01 AM
Re: J and R Engineering	Carpetsahib	05/02/13 01:55 AM
Re: J and R Engineering	Kutter	04/29/13 08:58 PM
Re: J and R Engineering	cct	06/28/13 05:11 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.384s Queries: 18 (0.365s) Memory: 0.8650 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2024-09-27 14:22:46 UTC
Valid HTML 5 and Valid CSS