Ok, let me go further, I have a Baker with 30 inch twist barrels, I knew there was a split in the right barrel about 12 inches ahead of the breech when I bought her.

She was NOT serviceable but had great condition as she could not be used.

What to do?? I fitted a full length set of Briley 28 gauge tubes and now the Baker can go to the range and when I return her to the Gun Room, she can enter into all the chatter that goes on in that room. I do say she has a smile on her sweet action smile

And if need be, I can take the little plastic hammer and the little nylon drive-out tool and remove the tubes in 10 seconds.

So, if you want the Boss to shoot like a Boss should do, this is a way to do it.




Nostalgic Mike

Last edited by skeettx; 08/02/12 10:36 PM.
USAF RET 1971-95 [Linked Image from jpgbox.com]