2holer:

Yes, that gun above is a Fox Sterlingworth...1923.....12 ga....your inletting cutouts are different probably because your gun is a Savage built gun from 1937 if I read what you posted correctly.....Savage made many changes after they bought out Fox.....

Here's an LC that I stripped, pinned, glassed and refinished....I usually put three horizontal pins in each stock, one front, middle and rear....makes for a very firm combo.......1914 12 ga. Trap Grade. I cover the pinning holes with sawdust when the epoxy is still soft...then sand, stain etc. after curing.....







Doug