Overhead view of the breech showing both hammers down,,the left one doesn't hit it's firing pin squarely.
I'm not a big on baseing everything on the lever position (this one is right at 6),,but the visable end of the cross bolt on the left side is buried into the receiver fence. Ususally they're out a few .000" or in the least flush with the fence when all is well.
Every Screw is buggered.
The frame, trigger guard, locks, ect all appear to have been buffed/shined up a bit before setting it out on the lot for sale.
Nice wood grain. I'd guess the wood has been gone over too from the looks of the edges of the inletting around the metal in places, the fit of the butt plate, the ultra high gloss and yet the wear to the checkering and wear and rounded edges of the wood around the locks that are underneath the finish.
Rear swivel missing.
No look at the insides of anything (TD) in all the pics.
Just some observations...
