Forums Calendar Active Threads
October
S M T W T F S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Who's Online Now
1 members (Ted Schefelbein), 768 guests, and 6 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics39,499
Posts562,109
Members14,586
Most Online9,918
Jul 28th, 2025
Previous Thread
Next Thread
Print Thread
Ithaca-SKB loose fore end
#315603 02/28/13 02:22 PM
Joined: Oct 2012
Posts: 70
Maine
SoTwin Offline OP
Sidelock
OP Offline
SoTwin
Sidelock

Joined: Oct 2012
Posts: 70
Maine
Would appreciate any insight on stopping the fore ends from rattling on a couple of Model 100s. They seem to be secure but not tight. Thanks!
Re: Ithaca-SKB loose fore end
SoTwin #315609 02/28/13 03:07 PM
Joined: Jun 2008
Posts: 5,696
Likes: 226
Amarillo, Texas
skeettx Offline
Sidelock
**
Offline
skeettx
Sidelock
**

Joined: Jun 2008
Posts: 5,696
Likes: 226
Amarillo, Texas
SoTwin
WELCOME on your first post to this part of the site smile

The EASY cheap way is to emplace a strip or two of normal masking tape inside the tip of the forend.

There are many more complex methods which are more appropriate
but this one is quick and easy.

Mike
Re: Ithaca-SKB loose fore end
skeettx #315613 02/28/13 03:54 PM
Joined: Oct 2012
Posts: 70
Maine
SoTwin Offline OP
Sidelock
OP Offline
SoTwin
Sidelock

Joined: Oct 2012
Posts: 70
Maine
thanks Mike
Re: Ithaca-SKB loose fore end
SoTwin #315645 02/28/13 08:26 PM
Joined: Jun 2008
Posts: 5,696
Likes: 226
Amarillo, Texas
skeettx Offline
Sidelock
**
Offline
skeettx
Sidelock
**

Joined: Jun 2008
Posts: 5,696
Likes: 226
Amarillo, Texas
WOW!! You guys must be taking a nap!!
I expected to get hammered on this one
Mike

USAF RET 1971-95 [Linked Image from jpgbox.com]
Re: Ithaca-SKB loose fore end
SoTwin #316170 03/04/13 06:01 PM
Joined: Apr 2010
Posts: 495
Likes: 71
ChiefAmungum Offline
Sidelock
**
Offline
ChiefAmungum
Sidelock
**

Joined: Apr 2010
Posts: 495
Likes: 71
Mike,
A bit of prodding maybe? SoTwin, take the forend off. Operate the mechanism and you will notice a "block" for want of a better word, that engages the hook on the underside of the barrels. There is a set screw that you will see on the block. Loosen this and give the pushrod a half turn clockwise. Try the fit. Repeat as necessary. Go very slowly or you may not get the forend off!This is bad, half a turn at a time!

Chief

Link Copied to Clipboard
Forum Rules · Mark All Read Contact Us · Forum Help · doublegunshop.com - home

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.124s Queries: 24 (0.101s) Memory: 0.8043 MB (Peak: 1.9021 MB) Data Comp: Off Server Time: 2025-10-10 10:33:25 UTC
Valid HTML 5 and Valid CSS