doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Feasibility of Chamber Sleeving

September
S	M	T	W	T	F	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30

Who's Online Now

3 members (Der Ami, David Williamson, Ian Forrester), 431 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,934

Posts550,856

Members14,460

Most Online1,344
Apr 29th, 2024

Print Thread

Re: Feasibility of Chamber Sleeving gil russell #321229 04/12/13 09:47 PM
Joined: Mar 2002 Posts: 1,815 Likes: 4 Republic of Texas Stallones Sidelock
Stallones Sidelock Joined: Mar 2002 Posts: 1,815 Likes: 4 Republic of Texas	Gil, I had a 10 ga 2 7/8 chamber sleeved to a 2 3/4 12 ga, and a 24 ga sleeved to 28 ga and they work great. If your gun was mine and the barrel thickness was ok ahead of the 2 3/4 area of the chamber, I would just shoot it and call it a long forcing cone.

Entire Thread
Subject	Posted By	Posted
Feasibility of Chamber Sleeving	gil russell	04/10/13 02:35 PM
Re: Feasibility of Chamber Sleeving	Bilious Bob	04/10/13 02:51 PM
Re: Feasibility of Chamber Sleeving	old colonel	04/10/13 07:32 PM
Re: Feasibility of Chamber Sleeving	ed good	04/11/13 12:06 AM
Re: Feasibility of Chamber Sleeving	Small Bore	04/12/13 09:47 AM
Re: Feasibility of Chamber Sleeving	L. Brown	04/12/13 01:58 PM
Re: Feasibility of Chamber Sleeving	SamW	04/12/13 02:29 PM
Re: Feasibility of Chamber Sleeving	2-piper	04/12/13 10:08 PM
Re: Feasibility of Chamber Sleeving	SamW	04/13/13 12:22 AM
Re: Feasibility of Chamber Sleeving	Stallones	04/13/13 01:47 AM
Re: Feasibility of Chamber Sleeving	gil russell	04/13/13 02:17 AM
Re: Feasibility of Chamber Sleeving	KY Jon	04/13/13 03:35 AM
Re: Feasibility of Chamber Sleeving	M&M	04/13/13 04:12 AM
Re: Feasibility of Chamber Sleeving	oldmanriver	04/13/13 12:26 PM
Re: Feasibility of Chamber Sleeving	gil russell	04/17/13 12:28 AM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.399s Queries: 17 (0.377s) Memory: 0.8175 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2024-09-27 18:59:43 UTC
Valid HTML 5 and Valid CSS