I make my own cleaning patches from cheap Walmart flannel. An hours time and you'll have a lifetime supply. I cut mine about 1 1/4" wide and 2 1/2" long (nothing precise here). Wet with Hoppes and wrap around bronze cleaning brush. Works far better than anything I've ever used. I dry with patches of paper shop towels cut to the same dimensions. Wooden rods are by far the best. To really clean out plastic fouling I have a bronze English brush mounted on a graphite cleaning rod and chucked in a hand drill. Spin it through the bore a couple times and that junk is gone!
Last edited by Joe Wood; 07/19/13 05:33 PM.
