1 Bronze bore brush
2 Bronze chamber brush
3 Wool mop (To apply bore protection of your choice after cleaning)
4 Wooden rods stay away from metal types (your choice of wood I use adapted one piece snooker cues)
5 Pipe cleaners for cleaning and lubricating the extractor hole
6 Bronze Jag if you can obtain one though Brass will do for cloth patches
7 The all important grease for the cross pin joint
And above all do the gun cleaning job properly by taking your time. Screw drivers can bring a world of trouble in the wrong hands!!!!!!!!!
Agree with all of the above, but I would add that so called Payne Gallwey pattern brushes are excellent and I use a fibre (rather than metal) Payne Gallwey brush to apply oil rather than a wool mop.
