I learned about that "bullet hitting the side of the barrel" thingy. Let me see.....I'm certain that I couldn't get the insert in a correct enough position with the tightening wedge. It kept heading toward the barrel wall or it was too loose. That is that the barrel of the insert was angled too much one way to get it on with the adjusting pads. As far as bore sighting, that's how I learned the bullets were hitting the inside of the shotgun bore, after I couldn't find where it was hitting. I don't know how high the pads are supposed to be originally but mine appear to be filed quite a bit. Are there replacements available?
It might be made for 50 yards, I truly don't know....but from what I remember I don't believe there is enough adjustment anywhere on the device to make up for where it was printing. I really need to try it again because I didn't make notes.
Last edited by sharps4590; 08/29/13 05:56 PM.
