"Those are the actual PSI( pounds per square inch )"
Note that if these are LUP pressures then they "Are Not" actual psi. We poor peons will never sort all this out until the makers & proof houses decide to use correct terminology. 1 actual psi should be 1 psi whether measured by SAAMI, CIP or whoever. Some 40 yrs ago we of the US quit using the psi term except on those pressure recorded by the tranducer method which repotedly gives correct readings. Others are listed as LUP's or CUP's depending upon the crusher metal. The 14.503 conversion factor between psi & bar is based upon "Actual Correct" pressure readings, not crusher pressure.

Miller/TN
I Didn't Say Everything I Said, Yogi Berra