Recently purchased a Webley 700 made in 1957 and in nearly mint condition. Beautifully actioned gun but they really fell down with the wood finish. Open wood pores all over and dull finish. Nicely stained so I don't want to do any sanding. Have been trying to fill the pores by applying LinSpeed, letting it dry for a few hours and then a second coat. After sitting overnight I have been cutting it back to the wood with French made 4/0 steel wool using a circular motion to cut. The pores just are not filling the way I want. Almost think the steel wool is pulling the finish out of the pores. If I wait any longer to cut off it becomes so hard it is very difficult to remove. Any suggestions?
