Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com When is chambering down the best option?

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

4 members (rwarren, SKB, FelixD, 1 invisible), 849 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,505

Posts562,175

Members14,588

Most Online9,918
Jul 28th, 2025

Print Thread

Re: When is chambering down the best option? Jawjadawg #360002 03/06/14 11:33 AM
Joined: Dec 2001 Posts: 775 SC Tom Martin Sidelock
Tom Martin Sidelock Joined: Dec 2001 Posts: 775 SC	I have an LC Smith double that had a fairly large diameter pit in the forcing cone of one barrel. It was deep enough that I could feel it with a bore gauge, and after consideration, I simply ran a long forcing cone reamer in it without lengthening the chamber. The pit was removed and I have shot the gun a number of years with no problems.

Entire Thread
Subject	Posted By	Posted
When is chambering down the best option?	Jawjadawg	03/05/14 02:53 PM
Re: When is chambering down the best option?	KY Jon	03/05/14 03:12 PM
Re: When is chambering down the best option?	Jawjadawg	03/05/14 03:28 PM
Re: When is chambering down the best option?	JNW	03/05/14 03:45 PM
Re: When is chambering down the best option?	bill schodlatz	03/05/14 03:48 PM
Re: When is chambering down the best option?	KY Jon	03/05/14 04:51 PM
Re: When is chambering down the best option?	Drew Hause	03/05/14 07:06 PM
Re: When is chambering down the best option?	skeettx	03/05/14 07:32 PM
Re: When is chambering down the best option?	eightbore	03/06/14 01:28 AM
Re: When is chambering down the best option?	Tom Martin	03/06/14 03:33 PM
Re: When is chambering down the best option?	Small Bore	03/07/14 02:44 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.526s Queries: 17 (0.493s) Memory: 0.8110 MB (Peak: 1.9024 MB) Data Comp: Off Server Time: 2025-10-13 14:02:12 UTC
Valid HTML 5 and Valid CSS