I would strongly consider going to 7-8K psi, as much below that most powder burn is highly erratic. I really like 7/8 oz 12 ga. loads, have loaded them for over nine years.

My favorite recipes, all w/ AA hulls, all 7/8 oz:

17.2 gr/Clays
17.5 gr/Red Dot
16.9 gr/E3
17.5 gr/Promo
17.2 gr/Clay Dot

All w/ CB 7/8 oz grey wad (AA clone)

You might also try 3/4 oz wads w/ the above powders, but bump up the powder about .4 grains (safe w/ same charges above, just check for acceptable powder burn, i.e., not much residual powder in barrels).



Last edited by GF1; 05/12/14 06:15 PM.