|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
|
|
|
|
|
|
|
|
2 members (oskar, 1 invisible),
378
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics39,555
Posts562,737
Members14,594
| |
Most Online9,918
Jul 28th, 2025
|
|
|
|
Joined: May 2006
Posts: 810 Likes: 15
Sidelock
|
OP
Sidelock
Joined: May 2006
Posts: 810 Likes: 15 |
What is the best way to remove the finish (presumably oil) from a stock? I have heard of using steel wool, or sand paper. Any suggestions? Thanks in advance.
-Shoot Straight, IM
|
|
|
|
|
Joined: Dec 2001
Posts: 7,321 Likes: 629
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 7,321 Likes: 629 |
If the stock is oil soaked I start with an acetone bath, followed by a bath of denatured alcohol.If no oil soaking is present I use chemical strippers such as citrus-strip, zip strip etc followed by whatever the directions call for to neutralize the stripper. I try to only sand the bare minimum amount and always when the metal is in the wood. I try to not use anything below 240 grit and always use backers for my paper. Good luck!
Firearms imports, consignments ![[Linked Image from i.imgur.com]](https://i.imgur.com/Ez9oz9Rl.jpg)
|
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
If the stock is oil soaked I start with an acetone bath, followed by a bath of denatured alcohol.If no oil soaking is present I use chemical strippers such as citrus-strip, zip strip etc followed by whatever the directions call for to neutralize the stripper. I try to only sand the bare minimum amount and always when the metal is in the wood. I try to not use anything below 240 grit and always use backers for my paper. Good luck! Steve What's the need for the follow-up alcohol bath? I've always just stopped after the acetone bath and had no problems. Steve
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
|
Joined: Dec 2001
Posts: 7,321 Likes: 629
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 7,321 Likes: 629 |
Might be overkill, just my method.
Firearms imports, consignments
|
|
|
|
|
Joined: Mar 2002
Posts: 2,857 Likes: 385
Sidelock
|
|
Sidelock
Joined: Mar 2002
Posts: 2,857 Likes: 385 |
i use the same method as stevie i wipe the stock down with denatured alcohol using clean paper towel.
|
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
Thanks Steve, I appreciate your candor. Another reason I asked is that I know Wonko follows up with an alcohol bath too.
Steve
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
|
Joined: Feb 2011
Posts: 1,405
Sidelock
|
|
Sidelock
Joined: Feb 2011
Posts: 1,405 |
Yes. Soak in Acetone or MEK. Will take off just about anything but some urithane finishes and get the crap out of the wood.
B.Dudley
|
|
|
|
|
Joined: Sep 2009
Posts: 112
Sidelock
|
|
Sidelock
Joined: Sep 2009
Posts: 112 |
|
|
|
|
|
Joined: Jun 2005
Posts: 412 Likes: 4
Sidelock
|
|
Sidelock
Joined: Jun 2005
Posts: 412 Likes: 4 |
I a chemical stripper to get the built up finish off the surface. Then I use Acetone to neutralize the stripper. I use a fairly hot stripper for refinishing. It will not take out oil and for that I have been using a product called Super Clean. If you use a soak tank it will remove lots more oil. I then use an Acetone bath to remove any residue from the Super Clean to bring the wood to color. Super Clean has a tendency to leave a darker color to the wood when dry. The Acetone changes the color back to neutral.
Dennis Earl Smith/Benefactor Life NRA, ACGG Professional member
|
|
|
|
|
Joined: May 2006
Posts: 810 Likes: 15
Sidelock
|
|
OP
Sidelock
Joined: May 2006
Posts: 810 Likes: 15 |
Thanks to all who replied.
-Shoot Straight, IM
|
|
|
|
|
|
|
