Sounds like it would be great with bullets meant for the 35 Rem 180/200gr or heavy cast bullets for the 357 Mag if the bore is in good shape.

The case dimension are pretty close to 9.3x72R when you take in for shrinkage on the cerrro-safe. You can send your cast to C&H and they will make a set of die reasonably. 9.3x72R brass is a smidgen short but should work. From looking in the books everything else is to large.

Last edited by oskar; 08/01/14 02:15 PM.
After the first shot the rest are just noise.