|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
0 members (),
963
guests, and
6
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics40,421
Posts575,225
Members14,712
| |
Most Online32,084
Jun 14th, 2026
|
|
|
|
Joined: Dec 2001
Posts: 3,977 Likes: 110
Sidelock
|
OP
Sidelock
Joined: Dec 2001
Posts: 3,977 Likes: 110 |
First time I've encountered this method of finishing a wooden butt. It is on my William Cashmore from the early 1900's. Not only does it have the typical horizontal lines cut but they also have a knurled appearance. Wouldn't think so but it definitely helps prevent sideways slippage on the shoulder. Regardless, it's a nice touch. PS: it doesn't appear that vertical lines were simply cut to achieve this. Each little "bead" is rounded like a necklace bead.  
Last edited by Joe Wood; 08/24/14 07:05 PM.
Disagreement is one of the joys of freedom.
|
|
|
|
|
Joined: Jan 2002
Posts: 7,726 Likes: 129
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 7,726 Likes: 129 |
|
|
|
|
|
Joined: Dec 2001
Posts: 3,977 Likes: 110
Sidelock
|
|
OP
Sidelock
Joined: Dec 2001
Posts: 3,977 Likes: 110 |
George, that's the only way I can think of.
Disagreement is one of the joys of freedom.
|
|
|
|
|
Joined: Jan 2002
Posts: 527
Sidelock
|
|
Sidelock
Joined: Jan 2002
Posts: 527 |
If I were to attempt a replication I would use a checkering border tool the long way (up & down) and the cut across with something suitable like a hacksaw blade. Looks kind of nice & different - might give it a whirl. --- John
|
|
|
|
|
Joined: Mar 2002
Posts: 7,920 Likes: 698
Sidelock
|
|
Sidelock
Joined: Mar 2002
Posts: 7,920 Likes: 698 |
Do all the beads line up in a vertical direction? If so they were not pressed in. It is just about impossible to keep everything lined up that way. I suspect they were first cut vertical and then the horizontal lines were cut. The vertical look like they were cut with a rounded or tool like I have seen a few borders. Then the horizontal lines were cut and they look like they were cut with a tool who had it shape like a v with rounded shoulders. It looks very nice.
|
|
|
|
|
Joined: Oct 2009
Posts: 531 Likes: 18
Sidelock
|
|
Sidelock
Joined: Oct 2009
Posts: 531 Likes: 18 |
I have a Boswell BLE c.1896 with the same butt treatment.
|
|
|
|
|
Joined: Dec 2001
Posts: 3,977 Likes: 110
Sidelock
|
|
OP
Sidelock
Joined: Dec 2001
Posts: 3,977 Likes: 110 |
But how did they get the beads to look like a stack of doughnuts, I mean everything rounded?
Disagreement is one of the joys of freedom.
|
|
|
|
|
Joined: Apr 2008
Posts: 173
Sidelock
|
|
Sidelock
Joined: Apr 2008
Posts: 173 |
But how did they get the beads to look like a stack of doughnuts, I mean everything rounded? With hard use of gun  I mean this kind of structure, even when made in hard wood, will wear very nice when using gun normaly i.e. rubbing the butt end against the shoulder which is wrapped with cloth or leather.
|
|
|
|
|
Joined: Dec 2001
Posts: 3,977 Likes: 110
Sidelock
|
|
OP
Sidelock
Joined: Dec 2001
Posts: 3,977 Likes: 110 |
No, that doesn't work here. The shape of them all is too uniform. And the gun has not seen much use at all, still shows original striking at breech, etc. I think most of the dents seen in the butt are from closet abuse.
Disagreement is one of the joys of freedom.
|
|
|
|
|
Joined: Jun 2008
Posts: 5,696 Likes: 226
Sidelock
|
|
Sidelock
Joined: Jun 2008
Posts: 5,696 Likes: 226 |
A roll die would accomplish the desired effect. Especially if the die was stationay on an axel and the stock was moved under the die. http://www.formrolldie.com/kn_series.htm
Last edited by skeettx; 08/25/14 03:51 PM.
USAF RET 1971-95 ![[Linked Image from jpgbox.com]](http://www.jpgbox.com/jpg/57865_80x60.jpg)
|
|
|
|
|
|
|
