June
S M T W T F S
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30
Who's Online Now
1 members (Jtplumb), 429 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,631
Posts547,172
Members14,430
Most Online1,344
Apr 29th, 2024
Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
Joined: Jan 2015
Posts: 32
Sidelock
OP Offline
Sidelock

Joined: Jan 2015
Posts: 32


This is an N.R.Davis 12 gauge I got last year for $175. 30" Barrels, about 8-1/2lbs. Strangely both barrels appear to be modified choke. The bores look pretty good for its age. Even though this was originally a 'cheap' shotgun it has excellent balance and 'swing.' Though it's about a hundred years old everything is tight and well fitted. Triggers are pretty good but nothing special. I had to replace the opening lever shortly after I got it, but Numerich was able to provide a new one, which was easy to fit.

Very sweet gun to shoot. Last outing to the range with this gun (before deer season, no I didn't get one) I was able to put two Rio Royal Brenneke slugs into three inches at fifty meters, which I figured was more than adequate for my usual hunting grounds.

Even though this was originally a 'cheap' gun the quality is better than I see on modern 'coach' guns that cost $400-$500. It's surprising how inexpensively you can get a useful double used. I love this old gun, and look forward to shooting it more this coming year.

Last edited by Tinker Pearce; 01/26/15 12:53 AM.

'One night as my car was going backwards through a cornfield at 90mph I had an epiphany...'
Joined: Feb 2008
Posts: 11,368
Likes: 416
Sidelock
**
Offline
Sidelock
**

Joined: Feb 2008
Posts: 11,368
Likes: 416
Tinker, we don't see many N.R. Davis guns in as good condition as yours. They were more inexpensive than the competition in their day, and most were rode hard and put away wet. They also did not stand the test of time either which is why many are loose or have been parted out. But if yours is tight and solid, I'm sure it will last for many more years if you stick with the low pressure loads for which it was intended. I'm not sure I would want to regularly use it as a slug gun. Modern high pressure loads sent even a lot of higher quality better designed guns to early graves.

I agree with your observation that is probably of higher quality (and looks better in my opinion) than many of the imported doubles today which sell for far more than what you paid. Enjoy.


A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.

Joined: Jan 2015
Posts: 32
Sidelock
OP Offline
Sidelock

Joined: Jan 2015
Posts: 32
Thanks Keith. If all goes to plan I'll probably shoot very few slugs or buckshot. Mostly light loads for the old girl; more of an honorable retirement than a second (or third) career. I have other guns for more serious work, but I do relish the thought that this 'every man's' gun is still so nice and capable after all this time.


'One night as my car was going backwards through a cornfield at 90mph I had an epiphany...'
Joined: Jun 2007
Posts: 247
Sidelock
*
Offline
Sidelock
*

Joined: Jun 2007
Posts: 247
Originally Posted By: keith
and most were rode hard and put away wet.


Not picking on any one here but why do guys use that rode hard and put away wet phrase when writing about guns? Its not the first time I've seen it used here. It does sound neat I suppose but we're not talking about horses. If you want to sound like an expert why not use the right terminology instead of a phrase that doesn't fit.

Joined: Dec 2008
Posts: 452
Sidelock
Offline
Sidelock

Joined: Dec 2008
Posts: 452
Nice one. Have looked at a lot of NR Davis, interested because Davis is my name. Most are loose always wondered why. Is it the metal or design?

Boats

Joined: Jan 2006
Posts: 9,450
Likes: 329
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2006
Posts: 9,450
Likes: 329
Some Davis infro here Tinker
http://www.picturetrail.com/sfx/album/view/23181554

Researcher is likely returning from the Vegas show but might have some catalog images

Joined: Mar 2013
Posts: 2,862
Sidelock
***
Offline
Sidelock
***

Joined: Mar 2013
Posts: 2,862
I think it's important to differentiate between "light" and "low-pressure" loads when talking about modern nitro powders. You may have seen on DocDrew's site that black powder loads were around 8,000 psi, a level that many "light" modern loads exceed. I'll summarize some of the info for you. Since this gun is considered a black powder era gun despite the fluid steel barrels, loads for it really fall into the same category as pattern-welded barrel guns (Twist, Damascus, and Laminated) in order to prevent mechanical deterioration. Recoil is another factor, (FPS relation to weight of shot charge) with lighter shot charge weights of an oz. or less in order to be easier on the wood. (factors that I learned from the learned folks on this board) There are people on this board who load low-pressure slug loads for Big Game, often black powder hand loads, which is fairly easy to set up for since you're not loading a high volume of shells. Then, you'd be able to use the gun for deer with no problems. If you choose to purchase brass hulls you don't even need a roll crimper. If I ever deer hunt again that's what I intend to do. For regular shooting with nitro powder, the low-pressure loads are more appropriate. Other older fluid steel barrel guns fall into the same category, such as Ithaca Flues, Crescents, Baker Batavia Specials, etc.

Regards
Ken


Last edited by Ken61; 01/26/15 09:55 AM.

I prefer wood to plastic, leather to nylon, waxed cotton to Gore-Tex, and split bamboo to graphite.
Joined: May 2011
Posts: 1,071
Sidelock
**
Offline
Sidelock
**

Joined: May 2011
Posts: 1,071
Yes, as Ken stated, a light load off of the store shelf does not mean it is a low pressure load. You have to watch what you are choosing for shells. I would be using the likes of Polywad, RST or Kent Gamebore low pressure loads.

Joined: Feb 2002
Posts: 2,859
Sidelock
**
Offline
Sidelock
**

Joined: Feb 2002
Posts: 2,859
Tinker,

I don’t know if you shoot clays or hunt birds much but if so I’d recommend that you take your gun to the patterning board and find out where its point of impact is. If you shoot off-the-shelf modern guns well you may struggle to hit the target with your 19th century N.R. Davis. Many American guns from that period had considerably more drop at the heal than modern guns have and require a more “heads up” shooting style. It may not be a problem for you, but I figured forewarned is forearmed. BTW it was enough of a problem for me that I’ve pretty much left the market for American guns and look at English and Continental guns these days since they typically have the stock dimensions I require.

There’s something very satisfying about bringing down a bird with a +100 year old gun. For me it helps put me back to a simpler time, that as a kid I was fortunate to enjoy.

Steve


Approach life like you do a yellow light - RUN IT! (Gail T.)
Joined: Jan 2006
Posts: 9,450
Likes: 329
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2006
Posts: 9,450
Likes: 329
The 'Black Powder Era' mostly ended after DuPont introduced their Bulk Smokeless in 1894

Black Powder Pressures:
3 dram / 82 grains 1 1/8 oz. (1200 fps) is about 5000 psi.
3 3/4 dram GOEX FFFg with 1 1/4 oz. (1240 fps) is about 6000 psi.
4 drams of FFF (about 108 gr) with 1 1/8 oz. (1420 fps) is about 7000 psi.

“1895 Smokeless Powders For Shotguns”
http://books.google.com/books?id=Wv0MAQAAIAAJ&pg=PA446&lpg
3 1/4 Dram/40 grains DuPont Bulk Smokeless 1 1/8 oz. = 7440 LUP
3 1/4 Dram/44 grains “E.C.” Bulk Smokeless 1 1/8 oz. = 7584 LUP
Note: Piezoelectric transducer measurements would be about 10% higher.

The 1963 George Herter “Reloaders Handbook” lists 23 grains (3 1/4 Dr. Eq.) of Infallible Dense Smokeless, now Unique, with 1 1/8 oz. shot in a paper case with paper wads (card & fiber) at 8,725 psi by LUP, or about 9,500 psi by modern transducers. (Courtesy of Mark Ouellette)

1902 Logan-Gregg Hdw. catalog Davis guns
"Choke bored for smokeless or black powder"


Page 1 of 3 1 2 3

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.097s Queries: 36 (0.071s) Memory: 0.8507 MB (Peak: 1.9016 MB) Data Comp: Off Server Time: 2024-06-26 06:43:31 UTC
Valid HTML 5 and Valid CSS