|
S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,934
Posts550,858
Members14,460
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Aug 2013
Posts: 977 Likes: 23
Sidelock
|
OP
Sidelock
Joined: Aug 2013
Posts: 977 Likes: 23 |
Hello. Was given a 20ga Savage era Sterlingworth today. Looks like a Brush model, has a pistol grip, Savage era safety, ejectors (broken rods), and dates to 1939.
I was wondering if it is typical to have to manually move the top lever fully right in order to close the action or not? You have to on this gun, and while I've never handled a Sterlingworth before, that doesn't seem right somehow.
Thanks.
|
|
|
|
Joined: Jan 2002
Posts: 5,907 Likes: 113
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,907 Likes: 113 |
The top-lever should lock to the right when you open the gun and stay there until you snap it shut. Some shade tree mechanic probably removed the trigger plate screw and lost at least the spring and at worst both the spring and the trip that hold the rotary bolt open. To see what I mean, see the disassembly instructions on the A.H. Fox Collectors Association, Inc. web site -- http://www.foxcollectors.com/ah_fox/content/disassembly.html
Last edited by Researcher; 05/29/15 12:25 AM.
|
|
|
|
Joined: Aug 2013
Posts: 977 Likes: 23
Sidelock
|
OP
Sidelock
Joined: Aug 2013
Posts: 977 Likes: 23 |
I see what you mean, and the instructions are great.
If nothing was lost, and it was simply put back together wrong, how do you correct this condition?
If parts are missing, what are the sources you folks go to for parts? I will need parts anyway I expect since the tiny rods that attach to the ejectors and insert into the barrel are gone.
All seems well other than those two issues.
|
|
|
|
Joined: Sep 2009
Posts: 80
Sidelock
|
Sidelock
Joined: Sep 2009
Posts: 80 |
Researcher: Thanks a bunch for that link! I was thinking of putting my auto-safety pin back into my 20 ga. After reviewing that link (which I printed) I have discarded the idea completely.
I have had a few SxS's apart with the attendant amateur problems that resulted and had to make a couple of those "little springs" that jump out at you without warning. Never again.
R.
|
|
|
|
Joined: Sep 2007
Posts: 244
Sidelock
|
Sidelock
Joined: Sep 2007
Posts: 244 |
Love those Sterlingworths. By far most Sterly's were extractor guns. Are you sure your's is an ejector gun with broken ejectors? Maybe it actually has extractors? One less thing to fix if it is an extractor gun. From my limited experience, one of the first and only things to fail on a Sterlingworth is the catch mechanism on the top lever. I imagine the parts wear and after about 100 years the engagement is no longer positive enough to hold the lever in the open position. I've got that problem with the one pictured below, and it is at the gunsmith now for repair.
|
|
|
|
Joined: Aug 2013
Posts: 977 Likes: 23
Sidelock
|
OP
Sidelock
Joined: Aug 2013
Posts: 977 Likes: 23 |
Are you sure your's is an ejector gun with broken ejectors? Maybe it actually has extractors? One less thing to fix if it is an extractor gun. No. Not sure. Not a newbie n general, but still learning my way around all of the wonderful SxS variations and such.
Last edited by B. Graham; 05/29/15 09:54 AM.
|
|
|
|
Joined: Dec 2001
Posts: 7,085 Likes: 462
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 7,085 Likes: 462 |
broken ejectors for sure.....you can clearly see the pins have sheared off both sides. New parts are available but they need quite a bit of fitting and the rim cuts need to be put in as well. You can not buy just the pins as they are part of the ejectors. You may consider removing the cocking slide to see if the keeper screw for the ejectors is in place. It looks like they are out more than would be possible if the screw was there. Repairing the top lever is very easy. First remove the trigger plate screw and see if the spring and stop are there. If they are then insert the stop in the proper orientation and you should be good to go. Steve
Last edited by SKB; 05/29/15 10:34 AM.
|
|
|
|
Joined: Sep 2007
Posts: 244
Sidelock
|
Sidelock
Joined: Sep 2007
Posts: 244 |
A Sterly with ejectors - a nice gift indeed! Congratulations and enjoy.
|
|
|
|
Joined: Aug 2013
Posts: 977 Likes: 23
Sidelock
|
OP
Sidelock
Joined: Aug 2013
Posts: 977 Likes: 23 |
A Sterly with ejectors - a nice gift indeed! Congratulations and enjoy. Thank you. It was a re-gifting. He was given a Parker and this Sterlingworth. He kept that Parker.
|
|
|
|
Joined: Aug 2013
Posts: 977 Likes: 23
Sidelock
|
OP
Sidelock
Joined: Aug 2013
Posts: 977 Likes: 23 |
broken ejectors for sure.....you can clearly see the pins have sheared off both sides. New parts are available but they need quite a bit of fitting and the rim cuts need to be put in as well. You can not buy just the pins as they are part of the ejectors. You may consider removing the cocking slide to see if the keeper screw for the ejectors is in place. It looks like they are out more than would be possible if the screw was there. Repairing the top lever is very easy. First remove the trigger plate screw and see if the spring and stop are there. If they are then insert the stop in the proper orientation and you should be good to go. Steve Breaking the gun still pushes out the ejectors like they were extractors. I'm assuming the it's fine to shoot. Who knows how long it's been this way. I did notice that you can see remnants of the pins on the back side of the ejectors, and one pin fell out of the hole when I took the barrel off to clean it (beautiful bores. The barrel was cut to 25 3/4", but at least they did a good job of it and reinstalled the proper bead. Thanks!
Last edited by B. Graham; 05/29/15 01:08 PM.
|
|
|
|
|
|