I ran across an orphaned set of wood for an ideal grade smith. Both the seller and I knew the local original owner. Seller says its for a 12ga, but it looks smaller to me. Serial # is I 12568.
Can anyone ID the size frame it goes on based on serial number?
Also the opening at the front edge of the butt stock is 1 1/4", from the top tang down to the bottom tang. Its a nice piece of wood, no cracks or bad dings, looks like a tru-oil type refinish ... pretty glossy. First pic is different lighting than 2 & 3. Thanks for the help.
Charlie
Last edited by C.R. Sides; 08/20/15 03:42 PM.
