Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Polishing Chambers

January
S	M	T	W	T	F	S
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31

Who's Online Now

5 members (craigd, Ian Forrester, SKB, 2 invisible), 415 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,825

Posts566,229

Members14,623

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Polishing Chambers JNW #450839 07/20/16 04:41 PM
Joined: Dec 2001 Posts: 7,401 Likes: 721 Colorado SKB Sidelock
SKB Sidelock Joined: Dec 2001 Posts: 7,401 Likes: 721 Colorado	You will be there all day with a flex hone. I'll sell you mine...:) either a lead lap turned on a lathe to match the chamber taper or some 320 grit emery cloth on a split mandrel with some oil. Go slow and try to not to linger in any one spot. If the tool marks are shallow they should come out with a minimum of material being removed. Good luck. The split mandrel can be made by simply cutting a slot in a piece of 3/8" drill rod and chamfering and polishing the end. Firearms imports, consignments

Entire Thread
Subject	Posted By	Posted
Polishing Chambers	JNW	07/20/16 09:23 PM
Re: Polishing Chambers	SKB	07/20/16 09:41 PM
Re: Polishing Chambers	JNW	07/20/16 11:49 PM
Re: Polishing Chambers	damascus	07/21/16 06:45 AM
Re: Polishing Chambers	Bibbyman	07/21/16 07:57 AM
Re: Polishing Chambers	JNW	07/22/16 03:05 AM
Re: Polishing Chambers	Gerald A. Mele	07/23/16 04:25 AM
Re: Polishing Chambers	SKB	07/23/16 08:20 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.390s Queries: 17 (0.370s) Memory: 0.8041 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2026-01-25 23:04:30 UTC
Valid HTML 5 and Valid CSS