|
S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
2 members (Jtplumb, skeettx),
198
guests, and
3
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,925
Posts550,795
Members14,459
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Oct 2004
Posts: 1,064
Sidelock
|
OP
Sidelock
Joined: Oct 2004
Posts: 1,064 |
Anybody got a cheap, easy way to polish pitting from just forward of the chambers? I've seen those little expandable hones made for polishing auto cylinders and wonder if they'd work on shotguns. I've also tried laps made from leather washers dressed with valve gringing compound. Any remedies you guys know of would be helpful. Thanks, Chops
Last edited by chopperlump; 06/27/07 02:37 AM.
|
|
|
|
Joined: May 2007
Posts: 603
Sidelock
|
Sidelock
Joined: May 2007
Posts: 603 |
A carefully managed "Turks head" on a drill and oil? RG
|
|
|
|
Joined: Oct 2004
Posts: 1,064
Sidelock
|
OP
Sidelock
Joined: Oct 2004
Posts: 1,064 |
Man, the turk's head would be too drastic --- like dragging a bale of barbed wire through the bores. I reckon I'll stay with the piston ring hone and leather washer drawbar with valve grinding compound. Thanks anyway, Cadet. Chops
|
|
|
|
Joined: Dec 2001
Posts: 7,084 Likes: 462
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 7,084 Likes: 462 |
I know of no easy and cheap way myself. I tend to ream the bores with a backbore reamer if possible. Its amazing what increasing bore diameter by .005" can do for removing pitting. Of course this is exspensive and so are the reamers. Steve
|
|
|
|
Joined: Jan 2007
Posts: 152 Likes: 2
Sidelock
|
Sidelock
Joined: Jan 2007
Posts: 152 Likes: 2 |
I am curious about the backbore reamer approach. Brownells sells them in .730" and .735" If your bore is already .730", can you go to .735" in one pass withthe reamer?
|
|
|
|
Joined: Nov 2006
Posts: 3,441 Likes: 37
Sidelock
|
Sidelock
Joined: Nov 2006
Posts: 3,441 Likes: 37 |
The multi-ball bore hones that Brownell's sells are manufactured by Brush Research Manufacturing Co. in the Los Angeles area. They will mail you a very nice catalog with tech tips in it, and showing their full range of hones.
|
|
|
|
Joined: Dec 2001
Posts: 7,084 Likes: 462
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 7,084 Likes: 462 |
yes you can do .005" with a sharp reamer. Use a slow feed and cutting fluid flooding the tool to remove the chips, it leaves an excellent finish. Steve
|
|
|
|
Joined: Dec 2001
Posts: 2,961 Likes: 9
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 2,961 Likes: 9 |
I use two grades of Scotch Brite on a dowel and a drill. Coarse cuts them quick and fine polishes very nice with a little light oil. You wanted cheap! Easy! bill
|
|
|
|
Joined: Feb 2002
Posts: 1,096
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,096 |
lengthen the forcing cones a little, then polish
|
|
|
|
Joined: Feb 2004
Posts: 13,880 Likes: 16
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,880 Likes: 16 |
I've bought a number of the "ball type" hones from Brush Research Mfg since they are local to me. I can tell you that they don't remove much material and are better suited to just smoothing up some forcing cone work or choke work than any thought of removing pitting. If Russ was still kickin, he'd say the same.
|
|
|
|
|
|