Popped into my local Cabela's Gun Library in Richfield, WI. and noticed a George T. Abbey on the rack. Almost identical to #47 discussed in the thread. T. Kilby marked barrels, 32 inches long. Serial number: 1087. My Galazan gauge makes it a 10 gauge with 2&5/8 inch chambers, tubes stamped 11 gauge. (it is marked as a 12 gauge). Barrels are laminated steel with pretty good finish outside and a little pitting inside. The bores would clean up with a very light hone. Wood is in nice condition showing it's age. Nice finish with no visible cracks Action and locks are grey. Nicely engraved with the same engraving on the hammers but slightly different pattern on the locks. They have it priced at 1699.00 and I was interested until I determined that it was indeed a 10 rather than a 12. I am taking care of # 46 in 10 gauge so I passed.
