Boy, have I a problem.
I recently took delivery of an NID that has , unfortunately, hot blued barrels. Not only does this tick me off but it is a disaster in the making.
The bluing salts are crusting around the solder joints and even though tight now, I can see the day that the ribs let loose.
Can anyone offer some help here. What can I do to neutralize the residual salts.
The two drain holes in the lower rib are open and about 5 inches from one another. This would seem to negate the possibility of flushing well.
Thanks in advance for any suggestions that may have worked for you.
Best,
John
