Look at the convert-a-stock pad system from Meadow Industries. I use these often on guns that have too much drop. The height of the comb is adjustable by the thickness of the spacer you put under the leather like pad that velcros to a velcro adhesive pad on either side of your stock. No need for bending, and the pads can easily be remove with a little fingernail polish remover; polish the stock with a little Tre-wax and you never know they were there if you decide to sell the gun. you can also add a little cast off if needed by placing the spacer under the leather like comb pad a little to the left.
http://www.meadowindustries.com/gunstocks.html#convert

Last edited by GaryW; 03/06/18 09:18 PM.