A photo put up by skeettx on a recent subject about LC Smith help, shoes a side view of the action & stock.
I have noticed differences in this area, both up behind the fences & also on the action bottom just under the side plate.
Some have a near vertical angle where the stock meets the action at the top while others tend to slope back.
The bigger difference is at the bottom where some are vertical at the action to stock joint while others are cut back at about 45 degrees. The one in the photo from skeettx is 90 degree vertical at the bottom.
Now, my question is; Why would there be such differences & especially that 90 degree to 45 degree at the bottom ?
Makes it more difficult to restock. A job that I am about to undertake.
https://i.pinimg.com/originals/e1/2b/d1/e12bd13e97c9b5b2413daf2f93eb7e48.jpgThe link is to one cut at an angle at the bottom like mine.
O.M